Rammed earth finish: the look without the wall

Bands of earth, laid by hand on an existing wall, with no formwork or structural change.

By Kret · Updated 2 Nov 2026 · 2 min read
Mekong Silt rammed earth colourway with grey earth bands
Colourway · Mekong Silt, RE-12
Short answer

A rammed earth finish is a clay coating laid in bands to look like compacted earth. Kret’s is 15–20 mm thick, against 200 mm or more for a real wall. It gives the look on an existing wall, but it does not carry load or add thermal mass.

Finish vs real wall

Kret Rammed EarthReal rammed earth
Thickness15–20 mm200–300 mm inside, 300–500 mm outside1
StructureDecorative onlyCan be structural, with engineering1
FormworkNoneRequired
WhereExisting walls, primedDesigned into the building
Thermal massNegligibleSignificant1

How it is made

Rammed Earth is made from Clay and laid by hand in bands of two to four earth tones. Each band is pressed and cut back, so the strata wander slightly, the way real compacted earth does. Clay-based finishes of this kind are a recognised alternative worldwide. Clayworks, for example, makes a 10 mm version.2

Terracotta Sunset rammed earth colourway
Colourway · Terracotta Sunset, RE-08

Where it works

It suits feature walls, lobbies, restaurants and columns. It is a tactile, matt finish that protects with a breathable sealer. Keep it out of direct water and heavy contact.

What to check first

  • The wall must be sound and primed: render, blockwork or board.
  • Allow for the extra 15–20 mm at door frames, skirtings and switches.
  • Plan where the bands meet corners and openings.
  • Decide how the finish stops, because a cut edge shows its layers.

Choosing a colourway

There are 30 colourways, from Natural Sand to Mekong Silt and Spice Market, and any can be the start of a recipe for your project. Bands read differently with distance. Fine Lines looks calm across a room, while Chunky Bands looks bold. Compare a sample at the real viewing distance.

Weight and depth matter on upper floors or board walls, so confirm the substrate early. See How to choose a plaster finish for other options.

Rammed Earth works best as one strong wall, not every wall. Give it good side light and a calm room around it.

Questions

Is it real rammed earth?

No. It is a clay and lime finish that reads like rammed earth, without the structural wall.

Can it go outdoors?

Kret lists it for interior feature walls, lobbies and columns. Ask before using it on exposed walls.

How thick is it?

15–20 mm, a fraction of a solid earth wall.

Sources

  1. Architecture Courses: Rammed earth wall thickness
  2. Dezeen: Rammed Earth Finishes by Clayworks

See it on your own wall.

Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.

Order a sample