How much does microcement cost in Thailand?

The price is set by the room as much as the material. Here is what moves it, and what to check in a quote.

By Kret · Updated 2 Nov 2026 · 5 min read
Calm Beige microcement floor in a living room
Design inspiration · Floor · Calm Beige
Short answer

Microcement is usually priced per square metre, supplied and applied. The rate depends on the area, the surface underneath and whether the room needs waterproofing. Small rooms cost more per metre, because setup and curing time barely shrink with the area.

What you are paying for

A microcement quote is mostly skilled time. The material is a thin 2–3 mm layer, built up by hand and then sealed. Five things move the rate.

Cost driverWhy it changes the price
AreaLarger, simpler areas cost less per square metre. Small rooms usually carry a minimum charge.12
Surface underneathConcrete is the simplest base. Old tile needs its grout lines filled first, and cracks need repair.34
LayoutCorners, niches, stairs and edges take longer than an open floor.5
Wet areasShowers need waterproofing underneath, and usually cost the most per square metre.6
Sealer and finishA matt or satin seal is part of the system, not an extra to leave out.

What other markets pay

Installed prices are rarely published in Thailand, so these figures from markets that do publish them show the pattern. Treat them as a guide to how rates behave, not as Thai prices.

MarketPublished guide
SingaporeS$175–250 per m², depending on product, contractor and complexity.4 One supplier lists S$180 for standard and S$230 for its waterproof grade. Another sets a S$10,000 minimum.7
AustraliaA$100–180 per m² for floors and A$130–220 for walls, on 50 m² or more over concrete, before GST.5
United Kingdom£100–180 or more per m² for walls and wet areas.1

The pattern is consistent. Walls often cost more than floors, wet rooms cost the most, and small jobs cost more per metre than large ones.

Kret applicator working on a plastered wall from a stepladder
Most of the price is skilled time on the wall.

Rates by surface

One UK guide breaks the price down by surface, which shows how quickly the rate moves. The pattern is more useful than the currency.1

SurfacePublished UK rate per m²
Large floor on a good base£80–110
Average floor with some preparation£110–150
Small, complex or heavily prepared floor£150 and up
Feature wall in a dry room£100–140
Bathroom walls, with tanking and sealing£130–180
Shower enclosure or detailed wet area£180 and up

So the same material can more than double in rate between an open living room and a shower. A single price per square metre across a whole project should make you ask what is included.

Two worked examples

Totals tell you more than rates. The same guide works through two jobs.1

JobWhat is countedIndicative total
Small ensuite to wet room14 m² of walls and wet area, a 3 m² floor, tanking and detailingAbout £2,770, over 3–5 days
Open-plan floor40 m², movement joints and thresholds, floor sealerAbout £4,350

Notice the bathroom. The floor is only 3 m², but 17 m² of surface gets finished. Walls are what drive the area in a bathroom, so measure them too. A Melbourne specialist gives A$5,000–12,000 or more for a full bathroom of 15–25 m² of walls and floors.6

What to send for an accurate quote

  • The project location and the areas to be finished.
  • What is there now: tile, screed, concrete or board.
  • Drawings, or photos with measurements in square metres.
  • Which areas get wet, and how wet.
  • Your colour and finish, matt or satin.

How to compare two quotes

A low rate can leave out the work that decides whether the floor lasts. Check that each quote states the following.

  • Surface preparation, including filling grout lines and repairing cracks.
  • Waterproofing in wet areas, and who is responsible for it.
  • Number of coats, the sealer used and when it should be renewed.
  • A sample panel on site before work starts.
  • Who answers for the finished surface if the material and the labour come from different companies.

Kret makes the material and applies it with its own crews, so there is one installed price and one party responsible for the surface. We also trowel a sample panel on site first, so you approve the real surface under real light.

Costs that often sit outside the quote

  • Removing fittings, silicone and old sealant.
  • Moving a floor drain or changing the falls in a shower.
  • Trimming doors, if the threshold needs it.
  • Protecting finished joinery and fixtures during the work.
  • Counters and stairs, usually priced by the run or the flight. One UK guide gives £600–1,500 or more per worktop run, and £1,500–3,500 or more per staircase flight.1

Plan for the cost of keeping it

Microcement is a sealed surface, so the sealer is a running cost. Published guidance suggests resealing high-use areas every 2–5 years.68 When you compare it with tile, include that visit, and set it against the time grout takes to keep clean.

How to bring the price down

  • Simplify the design, because fewer niches and edges mean fewer hours.
  • Do several rooms in one visit, since larger areas cost less per metre.2
  • Keep tile in zones that do not need to change.
  • Fix the base before the crew arrives, so they are not paid to wait.
  • Choose one colour across rooms instead of several.

Questions

Is microcement cheaper than tile?

Usually not per square metre. Published comparisons put tile lower on installed cost.9 The saving appears when microcement goes over existing tile, because there is no demolition.

Why does a small bathroom cost more per square metre?

Setup, preparation and curing take about the same time on 2 m² as on 4 m², so installers set a minimum charge.1

Does the price include waterproofing?

Not always. Ask, because a shower needs it and it is a separate layer from the microcement.

Can I get a price from a photo?

You can get a rough one from photos and measurements. A firm price needs a look at the surface, because its condition sets the preparation.

Does colour change the price?

It can. Colour is one of the factors suppliers list, and custom matching can add cost.2

How do I measure a bathroom?

Add the floor, each wall to the height you are finishing, and any niches. The total is often several times the floor area.

Sources

  1. Trade2Base: Microcement costs in the UK
  2. Topciment: How much does microcement cost? (2026)
  3. Topciment: How to apply microcement on old tiles
  4. Qanvast: What Is Microcement? A Complete Guide for Singapore Homeowners (2026)
  5. Architecture & Design: Determining the cost of microcement finishes
  6. ELF Decor: Microcement bathrooms in Melbourne
  7. Renonation: What is Microcement?
  8. Flooring Clarity: Microcement flooring pros and cons
  9. Studio Matrx: Microcement vs tile

Hold microcement before you specify it.

Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.

Order a sample