Limewash vs paint: what is the difference?
Paint covers a wall. Limewash becomes part of it, and looks different for that reason.

Limewash is slaked lime and mineral pigment, brushed on to give a matt, cloudy finish that lets a wall release moisture. Paint forms an even film that is easier to wash. Choose limewash for depth and breathability, and paint for uniform colour and easy cleaning.
Side by side
| Limewash | Acrylic paint | |
|---|---|---|
| Look | Matt, cloudy, moves with light | Even, one flat colour |
| Moisture | Vapour permeable, ten times or more than resin paint1 | Forms a tighter film |
| Application | Brushed, crossing strokes | Roller or spray |
| Cleaning | Not washable like acrylic2 | Usually wipeable |
| Refresh | Another coat, no stripping | Prepare and repaint |
| Surfaces | Porous: plaster, brick, stone1 | Most primed surfaces |
What limewash actually is
Limestone is burned, then slaked with water to make lime putty. That putty is thinned into a milky coat and tinted with mineral pigment.3 Once on the wall it slowly reacts with carbon dioxide in the air and turns back towards limestone. That is why it bonds into a porous wall instead of sitting on top as a film.
Beware of lookalikes
Not everything called limewash is. Some “limewash effect” products are acrylic paints with a cloudy application, and these will not behave the same way on a damp wall. Ask what the binder is. Real lime is caustic while wet, and decorators need hand and eye protection, which is a useful clue.34
Why limewash looks different
Each coat dries a little differently, so the wall settles into a soft cloud rather than a flat sheet. The colour is never perfectly even, and that is the point. Deeper shades move the most.5
Colour: what to expect
White lime particles mute every tint, so limewash cannot reach the saturated depth of paint.5 Light colours move gently, and dark colours move more and bloom less predictably.5 Do not expect two walls to match exactly, and do not choose from a screen.
How long each lasts
One limewash supplier says a properly applied lime paint can last 10–15 years indoors.6 Treat that as a maker’s figure, since wear depends on the room. Paint usually gets redone for different reasons, such as scuffs or a colour change. With limewash, a tired wall gets another coat. With paint, it gets preparation and two coats.
When paint is the better choice
Choose paint where a wall gets wiped often, such as a child’s room or a busy corridor, or where the colour must be exactly uniform. Paint also suits glossy or non-porous surfaces, where limewash has little to grip.5

Touch-ups are the real difference
Paint touch-ups can blend, especially on matt walls. Limewash is hard to spot repair, and one maker advises contacting them before attempting it.5 So plan to refresh a whole wall, corner to corner. Keep that in mind for hallways or walls near furniture.
In Thailand
Humidity is the strongest argument for lime, because moisture can leave the wall instead of pushing a film off. Read Does limewash work in Thailand’s humidity? for where it works and where it does not.
Kret Limewash comes in 25 colours, and it is usually finished in a day, which makes it the easiest way to try a mineral finish.
A quick way to decide
- Do you want a soft, moving surface? Limewash.
- Does the wall get wiped or knocked? Paint.
- Is the wall damp-prone but sound? Limewash, once the water is fixed.
- Is the wall covered in old acrylic? Paint, or prime first and test.3
- Must the colour match a brand standard exactly? Paint.
Many homes use both: limewash on the walls you look at, and durable paint on the walls you touch.
Questions
Is limewash more expensive than paint?
Usually, because the material and the skilled application both cost more. Ask for a quote on your wall.
Can limewash go over paint?
Sometimes, with a suitable primer. Test a small area first.1
Can I roll limewash on?
It is normally brushed. Kret uses a block brush in loose crossing strokes, because the strokes make the finish.
Is limewash the same as whitewash?
They are related, but whitewash is a general term for a white coating. Limewash specifically uses lime, and it can be tinted.
Sources
- The Building Conservation Directory: Limewash and Distempers
- Meoded Paints: Lime Wash technical data sheet
- The Building Conservation Directory: Interior decoration and permeability
- Rabart: Limewash data sheet (health and safety)
- Portola Paints: Lime Wash technical data sheet (2025)
- Vasari: Limewash vs Venetian plaster
Hold limewash before you specify it.
Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.
Order a sampleMore from the journal

Does limewash work in Thailand’s humidity?
Yes, on the right wall. Lime handles humid air well, but it cannot fix a wall that is already wet.

Limewash vs decorative plaster: how to choose
Both are lime-based, hand-applied and full of movement. One is a brushed coat, the other a trowelled layer.

How much does microcement cost in Thailand?
The price is set by the room as much as the material. Here is what moves it, and what to check in a quote.













