How to clean and care for microcement
The routine is simple. Most damage comes from the wrong cleaner, not from everyday use.

Clean microcement with water and a pH-neutral cleaner, using a soft mop or cloth. Avoid bleach, acids, abrasive pads and steam cleaners. Check the sealer once a year, and reseal when the surface looks dull or marks more easily.
Use and avoid
| Use | Avoid |
|---|---|
| Clean water and a damp cloth or mop | Bleach, ammonia and chlorine1 |
| pH-neutral or soap-based cleaner2 | Acid-based cleaners, including vinegar1 |
| Soft vacuum or broom for grit | Scouring pads and steel wool1 |
| Felt pads under furniture | Steam cleaners and generic bathroom sprays1 |
The first two weeks
The sealer is still curing. One care guide says to use water only for the first 14 days.1 Keep rugs and heavy furniture off until your installer says it is ready.
Week to week
- Vacuum grit, because it scratches the sealer underfoot.
- Mop with a neutral cleaner, then let it dry.
- Wipe spills promptly, especially acids, wine and hair dye.1
- Squeegee shower walls if your water is hard.
Room by room
| Room | Routine | Watch for |
|---|---|---|
| Living areas | Vacuum, then a damp mop | Grit and dragged furniture3 |
| Bathroom | Rinse, wipe, ventilate | Hair dye, make-up, cleaning products3 |
| Shower | Rinse after use, check silicone | Pooling water1 |
| Kitchen | Wipe spills quickly | Acids, oil, hot pans1 |
| Busy commercial floors | Daily soft cleaning, mats at doors | Faster sealer wear4 |
Protecting the surface
- Put felt pads under furniture, and never drag heavy objects.3
- Use rugs in busy zones to reduce wear.4
- Keep a mat at external doors, because grit does most of the damage.
- Check silicone joints, which can perish before the finish does.5
When to reseal
Inspect the surface once a year. Reseal when areas look duller or mark more easily. Busy zones such as hallways and counters usually need it first.1 Use the sealer your installer specifies, because the wrong one can stain.2
How often to reseal
Published advice for high-use areas is every 2–5 years, depending on traffic.34 A quiet bedroom will go far longer than a hotel corridor. Instead of following a date, check for the signs: dull patches, water no longer beading, or marks appearing more easily.1
Resealing is not a repaint. The surface has to be cleaned properly, and the room stays out of use while it cures. Plan it like a small job, and use the same sealer system.
Common stains
| Stain | First step |
|---|---|
| Coffee, wine, curry | Blot and wipe with neutral cleaner, quickly1 |
| Oil | Wipe, then neutral cleaner. Do not scrub |
| Hard water marks | Neutral cleaner and a soft cloth. Avoid vinegar1 |
| Black marks on silicone | Replace the silicone, and improve ventilation |
| Anything that stays | Stop, and call your installer |
Always test a product on a hidden corner first. If a mark does not lift with a neutral cleaner, stop there. Most lasting damage comes from trying harder chemicals.
When something goes wrong
Small scratches and chips can often be repaired, though the repair may not blend perfectly because the finish is handmade.6 Do not try to sand a mark out. Contact your installer, as larger damage can mean refinishing a section.6
A simple yearly check
- Pour a few drops of water on busy areas. If they soak in or darken the surface, the sealer is wearing.
- Look along the floor towards a window, to spot dull tracks.
- Check silicone around the shower, basin and kitchen sink.
- Check around drains for standing water.1
- Note any fine lines, and whether they have changed.
- Photograph anything new, so you can compare next year.
Give cleaners clear instructions
Most damage comes from a well-meaning cleaner with a strong bathroom spray. Leave one bottle of the right product in the room, and tell maids, housekeepers and tenants what not to use. In hotels, write it into the housekeeping manual and train staff, because one wrong product across 100 bathrooms is an expensive mistake.
Questions
Can I use a steam mop?
No. Care guides say to avoid steam cleaners.1
Can I use bathroom cleaner?
Not a generic one. Use a pH-neutral product.1
How often does it need resealing?
It depends on use and product. Inspect yearly, and reseal when it looks dull.1
Can I use a robot vacuum and mop?
Usually yes, with soft brushes, plain water or neutral cleaner. Avoid pads that scrub.
Sources
- Microne: Microcement care guide
- Homebuilding & Renovating: Microcement flooring
- ELF Decor: Microcement bathrooms in Melbourne
- Flooring Clarity: Microcement flooring pros and cons
- Homebuilding & Renovating: Microcement bathrooms
- Qanvast: What Is Microcement? A Complete Guide for Singapore Homeowners (2026)
Hold microcement before you specify it.
Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.
Order a sampleMore from the journal

How much does microcement cost in Thailand?
The price is set by the room as much as the material. Here is what moves it, and what to check in a quote.

Microcement vs tile: which should you choose?
Each wins on different terms. The right answer depends on what is on the wall now and how the room is used.

Can microcement go in a shower?
Yes, as part of a system. The microcement is the finish you see, and the waterproofing beneath it does the protecting.













