Can microcement go in a shower?
Yes, as part of a system. The microcement is the finish you see, and the waterproofing beneath it does the protecting.

Microcement works in showers and wet rooms when it sits on a proper waterproofing layer. It is a finish, not a tanking system. Most failures happen at junctions, drains and fixings, so the details matter more than the product name.
The common mistake
Many people assume a waterproof-looking coating is also the waterproofing. It is not.1 Microcement is 2–3 mm thick and relies on the layers below it. UK specialists highly recommend a tanking system under it in showers.2 A failure is expensive, because the finish has to be stripped back to reach the membrane.3
A wet-room build-up, from the bottom
| Layer | What it does | What to check |
|---|---|---|
| Sound substrate | Gives a stable base | No movement, loose tile or active leak |
| Falls to the drain | Moves water away | Formed before the finish goes on |
| Waterproofing membrane | Keeps water out of the structure | Covers the whole shower zone. Australian rules, for comparison, require at least 1,800 mm up shower walls3 |
| Mesh, where needed | Supports the base layers | Often fibreglass2 |
| Microcement | The finish | A grade intended for wet areas2 |
| Sealer | Resists stains and water | Polyurethane, matt or satin, and renewed over time4 |
Prove the waterproofing before you cover it
Once microcement is on, the membrane is out of sight, so test it first. A flood test is the usual way. After the membrane has cured, the drain is plugged, a temporary dam is built, and the area is filled with water. It sits for 24 hours, and a clear drop in the level signals a leak.5
- Use a proper drain plug, so a leaking plug does not confuse the result.
- Mark the level and take dated photos.5
- Fill from a separate source, not from the shower, so leaking plumbing does not skew the test.5
- In a condo, check the unit below, and tell the juristic person beforehand.
Ask for this in writing. One Melbourne specialist expects a waterproofing certificate on completion, and treats skipping the membrane as a sign to avoid the installer.3
Where wet rooms fail
- Junctions. Check where microcement meets a shower tray, tile or another finish.2
- Drains. Look at the join between the membrane and the drain body.
- Fixings. Drilling for rails and shelves can make that spot permeable. Plan fixings first, or keep them out of the wettest zones.2
- Sealant. Mastic joints perish over time and need to be kept up.2
- Old tile. Going over tile is possible, but tile with unreliable waterproofing behind it is no base for a shower.6

Details to design before work starts
| Detail | What to decide |
|---|---|
| Falls | The floor must slope to the drain. Water should not pool on the surface7 |
| Drain | Point drain or linear, and how the membrane meets it |
| Niches | Slope the base outward so water drains, and waterproof the box |
| Hob or threshold | Level entry needs more careful falls and a wider wet zone |
| Glass screens | Fix positions early, because each fixing is a hole |
| Junctions | Wall to floor, and any change of material |
| Pipes and valves | Seal every penetration into the membrane |
How long it takes
Published timelines range from 3–5 days for a small ensuite to around 5–7 working days for a bathroom overlay.83 Waterproofing and sealer curing are what you cannot rush. Plan for the bathroom to be out of use, and ask when it can take its first shower.
Slip ratings: ask the right question
R ratings under DIN 51130 come from a shod test, using boots on a wet ramp. Barefoot wet areas use a different test, DIN 51097, with classes A, B and C. Class B suits showers and pool surrounds.9
For a shower floor, ask for the barefoot class of the exact finish. A smoother seal looks calmer but may offer less grip, so test on a sample panel when the room matters.
Looking after it
Clean with pH-neutral products. Harsh or acidic cleaners can damage the seal. The sealer wears over time, especially in wet zones, so ask when it should be renewed.42
Well-applied microcement resists mould better than grouted tile because there are no grout lines for it to grow in.2 Ventilation still matters.
Renovating an old Thai bathroom
Many older bathrooms have no record of what is under the tile. Before going over it, look for damp on the far side of the wall, stains on the ceiling below, and hollow tile around the drain. If there is any doubt, strip the shower zone back and rebuild it, and keep the overlay for the dry walls. This costs more, but a hidden leak costs more again.
Before you sign
- Which membrane is used, and is it named in the quote?
- Who is responsible if it leaks: the waterproofer or the applicator?
- Will the waterproofing be tested before the finish goes on?
- Which microcement grade and sealer are used in the wet zone?
- What is the slip class of the shower floor?
- How long is the written warranty? One specialist recommends at least 5 years.3
Questions
Is microcement waterproof?
Some grades are made for wet areas, but the shower still needs waterproofing beneath it. Treat the whole build-up as the waterproof system.12
Can microcement go over tiles in a shower?
Technically yes, but it is hard to do well.10 The tiles must be solid and the waterproofing behind them reliable. If in doubt, strip back.
How long does a microcement shower last?
Homebuilding & Renovating reports estimates of 5 to more than 10 years, depending on application quality.2
Can I drill into a microcement wall?
Yes, but drilling can make that point permeable. Avoid high-wet zones where possible.2
Can microcement go in a steam room?
Treat that as a special case. Constant heat and vapour are harder than a normal shower, so ask for a tested system before specifying it.
Should the shower floor be tile instead?
It is a common compromise. Tile on the shower floor and microcement on the walls can reduce risk, as long as the junction is well detailed.
Sources
- Duraamen: Is microcement right for your bathroom?
- Homebuilding & Renovating: Microcement bathrooms
- ELF Decor: Microcement bathrooms in Melbourne
- Qanvast: What Is Microcement? A Complete Guide for Singapore Homeowners (2026)
- TEC: The importance of a flood test
- Marius Aurenti: Waxed concrete over bathroom tiles
- Microne: Microcement care guide
- Trade2Base: Microcement costs in the UK
- European Heritage: Slip resistance ratings explained
- Onions Australia: Rethinking the trendy bathroom renovation
Hold microcement before you specify it.
Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.
Order a sampleMore from the journal

How much does microcement cost in Thailand?
The price is set by the room as much as the material. Here is what moves it, and what to check in a quote.

Microcement vs tile: which should you choose?
Each wins on different terms. The right answer depends on what is on the wall now and how the room is used.

What is microcement?
A thin, hand-trowelled coating that turns walls, floors and showers into one continuous surface.













