Why we trowel a mock-up first

A handmade surface can’t be fully specified in words. A sample panel settles what drawings cannot.

By Kret · Updated 2 Nov 2026 · 2 min read
Kret crew working on site
Kret crews on site.
Short answer

A mock-up is a real sample of the finish on site, approved before work begins. It shows colour, texture and sheen under real light, and it becomes the benchmark for the finished job. That prevents most arguments about whether a handmade surface is right.

What drawings can’t show

Walls & Ceilings makes the point for drywall: drawings set a finish level, but they can’t show how it will look once installed and viewed on site. Once accepted, the mock-up is the benchmark, which reduces disputes and rework.1 This matters even more for hand-laid finishes, because no two walls match.

How to run a good one

  • Use the real substrate, in the real location.
  • Make it large enough to read, not a palm-sized chip.
  • Include every layer, including the sealer.1
  • View it in natural and artificial light close to final conditions.1
  • Agree who signs it off, and keep it until the job ends.

What to check

CheckQuestion
ColourIs it right next to the floor and joinery?
TextureIs the depth right at the viewing distance?
SheenDoes raking light make it too strong?
VariationIs the range of movement acceptable?
JunctionsHow does it meet skirtings, frames and switches?

Common mistakes

  • Judging the panel before it has dried.
  • Leaving off the sealer, which changes colour and sheen.
  • Viewing it in daylight when the room will be used at night.
  • Making it too small to show variation.
  • Throwing it away before the job ends.

How Kret does it

We trowel a sample panel on site before work starts, so the client approves the real surface under real light. Because the same company makes the material and applies it, the approved panel and the finished wall come from the same hands. For smaller rooms, start with samples in your chosen colours.

For specifiers

Write the mock-up into the specification, not as a site favour. How to specify decorative finishes shows where it fits.

Questions

Is a mock-up the same as a sample?

No. A sample is a small board. A mock-up is on site, on the real wall, under real light.

Who should approve it?

Agree this early. Usually the designer and client, with the contractor present.1

Will the wall match the mock-up exactly?

It will match the range, but not every mark. It is a handmade surface.

Sources

  1. Walls & Ceilings: Why jobsite mock-ups are still essential

See it on your own wall.

Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.

Order a sample