Board-formed concrete: the look, without pouring a wall
The grain of timber shuttering, a few millimetres thick, on a wall you already have.

Board-formed concrete gets its look from being poured into timber formwork, which leaves the grain on the surface. Kret Board-formed presses real timber grain into a 3–5 mm mineral coat on an existing wall. You get the look without formwork or weight, but no structural concrete.
What the real thing is
Poured board-formed concrete is cast in moulds lined with wooden planks, so the grain and imperfections of the wood transfer to the surface.1 That makes each pour unique. It also means the look depends on carpentry, because the formwork has to be right the first time.
Finish vs poured
| Kret Board-formed | Poured concrete | |
|---|---|---|
| Thickness | 3–5 mm | A structural wall |
| Formwork | None | Timber formwork1 |
| Existing wall | Applied over it | New construction |
| Board layout | Set per project | Set before the pour |
| Mistakes | Can be reworked | Cast in |
| Colour | 35 colours, 10 natural concrete tones | Concrete grey unless pigmented |

What to decide
- Board width. Narrow boards feel finer, and wide boards feel more architectural.
- Grain depth. Deep grain needs raking light to show.
- Joint rhythm. Align joints with doors, windows and ceiling lines.
- Colour. Natural Grey is the classic, while warm tones suit bedrooms.
Board-formed or Cast Panels?
Board-formed has linear grain, so it feels warmer and more crafted. Cast Panels gives the look of precast concrete, with crisp joints and tie holes, so it feels cooler and more architectural. Long horizontal boards can widen a room, while vertical boards add height. A sample at full board length helps you decide.
Where it works
It suits interior walls, columns and soffits, finished with a matt sealer. It is often used in cafés, bars and entrances. For a flat, cast look with tie holes, see Cast Panels. For a floor or a shower, use microcement.
Before you order, measure the wall and sketch the board layout. Joints that land awkwardly beside a door or switch are the detail people notice most, and they are simple to avoid on paper.
Questions
Is it real concrete?
It is a thin mineral coat with real timber grain impressions, not poured concrete.
Is it heavy?
No. It is a fraction of the weight of concrete.
Can I choose the board width?
Yes. Width, grain depth and joint rhythm are set with you for each project.
Sources
See it on your own wall.
Hand-made samples in your colours, delivered to your studio. For larger projects we trowel a full-size panel on site.
Order a sampleMore from the journal

How much does microcement cost in Thailand?
The price is set by the room as much as the material. Here is what moves it, and what to check in a quote.

Microcement vs tile: which should you choose?
Each wins on different terms. The right answer depends on what is on the wall now and how the room is used.

Does limewash work in Thailand’s humidity?
Yes, on the right wall. Lime handles humid air well, but it cannot fix a wall that is already wet.













